The Application - Anti-Theft Alerts 📱

To configure the anti-theft alerts for your Flashbird or Pegase Moto GPS tracker, please go to the settings of your Flashbird (by Pegase) application and click on 'Anti-Theft Alerts.'

• Level 1 - Vibration Alert:
  Be alerted at the slightest vibration of your vehicle. Ideal for a vehicle parked in a private garage.
  
  
• Level 2 - Suspicious Movements:
  Be alerted when your vehicle experiences multiple repeated movements. Ideal for an outdoor-parked vehicle.
  
  
• Level 3 - Movement Alert:
  Be alerted by call or notification when your vehicle is in motion. Ideal for all parking situations.
  
  
• Critical Alerts:
  Receive alerts even when your phone is in silent or "do not disturb" mode (option available for each alert level).

    

Note:

• The device does not make any sound in case of theft to avoid detection.
• Calls are triggered for movement detected at approximately 300 meters. If you do not wish to receive the call, you can opt to receive an SMS instead. Simply configure the 'SMS time zone.

To configure the anti-theft alerts for your Flashbird or Pegase Moto GPS tracker, please go to the settings of your Flashbird (by Pegase) application and click on 'Automatic Anti-Theft Activation.'

If you are not receiving anti-theft alerts, here's why:

• Your smartphone or your Flashbird/Pegase Moto GPS tracker is not connected to the GSM and/or GPS network.
  
  
• You have not allowed notifications from the Flashbird (by Pegase) application in your phone's general settings.
  
  
• Your GPS tracker is out of battery; please check its power source.
  
  
• The Smartkey of your Flashbird GPS tracker was detected within the last 10 minutes, and/or you have not stopped the current trip using the application.
  
  
• Your GPS tracker may have a technical issue. Try the reset procedure:
  • Reset Procedure for Pegase
  • Reset Procedure for Flashbird
    
    
• If, despite the reset procedure, the anti-theft alerts are not working, contact our technical support through this link: [Link to Contact Technical Support].

If the Smartkey associated with your Flashbird GPS tracker is not being detected by your Flashbird GPS tracker, here are possible reasons:

1. The battery in your Smartkey is empty, inserted incorrectly, or there is a loose connection.
   To resolve this issue, open your Smartkey using a properly sized flat-head screwdriver and check the condition of the battery and the connection with the electronic card.
   
   
2. If the battery in your Smartkey is functional but your Smartkey still isn't working, please contact our technical support.